IFM Electronic Ecomot300 AC2630, Дополнительное руководство по устройству

Страница: 94 / 111

ifm Supplementary device manual Interface CANopen in the AS-i controllerE
Operating and display elements Status LEDs on the network connection
94
7 Operating and display elements
Diagnostic LEDs
→ separate basic device manual
Key functions → separate basic device manual
Display basic functions → separate basic device manual
7.1 Status LEDs on the network connection
4 status LEDs on the controllerE inform about the status of the CANopen interface and the systems
connected to it:
Run
☼ ☼
Error
Status
☼ ☼
Power
Photo: status LEDs on the network connection
7.1.1 LED [Run]
LED status Description
out no supply voltage
permanently green module in the OPERATIONAL state
green (1x, pause) module in the STOP state
green flashing module in the PRE-OPERATIONAL state
red flashing error during bus initialization
7.1.2 LED [Error]
LED status Description
out no fault
permanently red bus is off
red (1x, pause) warning limit reached
red (2x, pause) error control event
red (3x, pause) SYNC error
7.1.3 LED [Status]
LED status Description
out normal operation
permanently red non reversible error detected