IFM Electronic AL1122 Скачать руководство пользователя

Страница: 40 / 111

ifm

Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 8 Ports IP 65 / IP 67 (AL1122)

2017-05-31

Configuration

8.3

LR DEVICE: Configure IO-Link devices

22403

In order to configure the IO-Link devices connected to the AL1122 using the parameter setting
software LR DEVICE:

Requirements:

AL1122 is correctly installed and connected to the LR DEVICE software via the EtherNet/IP interface (X21/X22).

The IO-Link device is connected correctly with the AL1122.

The operating mode of the IO-Link interface is "IO-Link" (parameter [Port x mode] = IO-Link)

Parameter [Access rights] is configured with one of the following values:

– EtherNet/IP + LineRecorder
– LineRecorder only

1 Select IO-Link master

►

Start LR DEVICE.

►

Update IODD file library
OR:

Import IODD file of the IO-Link device manually.

►

Scan network for devices.

LR DEVICE recognises all IO-Link masters of the EtherNet/IP network.

2 Add IO-Link device

►

Under [ONLINE]: Click on the required AL1122.

LR DEVICE automatically detects the IO-Link devices connected to the AL1122 (e.g. ifm Sensor KG5065).

3 Configure IO-Link device

►

Mouse click on the port to which the IO-Link device is connected.

LR DEVICE reads and shows the current parameter values of the IO-Link device.

►

Configure IO-Link device.

Information about the available parameters of the IO-Link device:

→ Operating instructions of

the IO-Link device

►

Store changed configuration on the IO-Link device.

Содержание AL1122
















































































































Результаты поиска

Содержание AL1122

Отзывы:

Похожие инструкции для AL1122

Бренды по названию

Популярные бренды

IFM Electronic AL1122, Руководство по эксплуатации

Результаты поиска

Содержание AL1122

Отзывы:

Похожие инструкции для AL1122

Бренды по названию

Популярные бренды