Ÿ
Hang the unit on the wall mounting plates (3).
Ÿ
Level the unit using your spirit level and adjusting the screw on the bottom
of the hanging bracket (4).
Ÿ
Once level screw on the front of the hanging bracket to tighten the unit to
the wall (5).
Note:
Full height vanity units stand on the floor so will come complete with
fitted legs. To adjust the legs, unclip the plinth from the legs and adjust the
legs to the desired height (6). Replace the plinth.
3
4
5
6
Vanity Unit
Installation Instructions
We have taken great care to ensure that this product reaches you in perfect
condition. However should any parts be damaged or missing, please contact your
point of purchase. This does not affect your statutory rights.
In addition, if you require replacement parts your point of purchase will be happy
to assist.
Care and Maintenance
Ÿ
This furniture is made of wood and has a water resistant finish. It should not be left wet.
Ÿ
The quality of the finish is best maintained if it is wiped with a dry cloth after use.
Ÿ
It should only be cleaned using a soft damp cloth followed by a dry cloth.
Ÿ
Do not use bleach or any abrasive cleaner.
Step 2 - Hang Unit
Important:
Ensure all cutouts for plumbing are carried out prior to
installation.
Install the unit first
before
fitting the door following the instructions
supplied with the unit.
to the door/drawer front.
Please note:
Images are for illustration purposes only.