SucceX-Force 5.8GHz
25mW/100mW/400mW/800mW
RX
CH ANN EL
B AN D
PO WER
Video Out
(7V~36V)
Ground (GND)
Ground (GND)
5V camera output
5V Output only for FPV cameras!
The RX wire can be linked to any free UART TX on your Flight Control
and setup for IRC Tramp VTX telemetry to change parameters of
your VTX through your OSD.
If you experience severe signal interference in your video feed please
inspect your power source for electrical noise. Some common issues
are too long motor screws, no additional capacitor added to your ESC,
bad or noisy motors, bad or noisy ESC.
Wiring Diagram
