ifi S251-2KWP, Инструкция по эксплуатации и техническому обслуживанию

Страница: 26 / 31

Page 26
REQUEST AMPLIFIER STATUS
(POWER AND METERING)
CODE Amplifier FUNCTION
POWERFWD Returns Forward Power Value in Watts, ‘POWER FWD: XXXXX W’
POWERRFL Returns Reflected Power Value in Watts, ‘POWER RFL: XXXXX W’
PS1V Returns Power Supply 1 Volts Value in Volts, ‘PWRSPLYV1: XXXXX V’
PS1I Returns Power Supply 1 Current Value in Amps, ‘PWRSPLYI1: XXXXX A’
PS2V Returns Power Supply 2 Volts Value , [ If Applicable ]
PS2I Returns Power Supply 2 Current Value [ If Applicable ]
PS3V Returns Power Supply 3 Volts Value , [ If Applicable ]
PS3I Returns Power Supply 3 Current Value [ If Applicable ]
PS4V
Returns Power Supply 4 Volts Value , [ If Applicable ]
PS4I Returns Power Supply 4 Current Value [ If Applicable ]
TOTALH Returns Total hours unit is on, ‘TOTAL HRS: XXXXX’
OPERATEH Returns Operation Hours Value, ‘OPERATE HRS: XXXXX’
BAND1 Selects Band 1 of Operation [ In Dual Band units only ]
BAND2 Selects Band 2 of Operation [ In Dual Band units only ]
NOLEV Selects NO Leveling [ Optional ]
INTLEV
Selects INTERNAL Leveling [ Optional ]
EXTLEV
Selects EXTERNAL Leveling [ Optional ]
QUIETOFF Selects QUIETING to OFF [ Optional ]
QUIETAUTO Selects QUIETING to AUTO mode [ Optional ]
QUIETSTATUS Returns Quieting mode of operation [ Optional ]
‘QUIETING OFF’
‘QUIETING AUTO’
ZEROATT Sets the Amplifier for ZERO Attenuation & Returns, ‘GAIN: 00100 %’
FULLATT Sets the Amplifier for FULL Attenuation & Returns, ‘GAIN: 00000 %’
GAIN Returns Gain Value in percentage, ‘GAIN: XXXXX%’
MODEL Returns Model number of the unit
SN
Returns Serial number of the unit
*IDN?
Returns ASCII response comprising of four data fields in the format
<Manufacturer>, <Model>, <Serial Number>, <Firmware Version>
*RST Reset Command, Sets the Amplifier to the factory default power up state (reboots MPU)
NOTES:
1. ALL GPIB COMMANDS AND REQUESTS MUST CONSIST ENTIRELY OF UPPER CASE ALPHANUMERIC
CHARACTERS.
2. WHEN SENDING COMMAND STRINGS TO THE AMPLIFIER, A CARRIAGE RETURN CHARACTER
(0Dh)
FOLLOWED BY A LINE FEED CHARACTER (0Ah) , MUST ALWAYS BE APPENDED TO THE COMMAND, and
OTHERWISE THE AMPLIFIER WILL WAIT INDEFINITELY FOR THE CR-LF COMBINATION.