iEXERGY wibutler pro, Руководство пользователя

Страница: 11 / 25

11
Master Key
6. Logging in
6.1 Logging in as user
For the user login, connect the cables as stated ( 3. Connecting the cables ). Download
the wibutler app and install it. The operating device (smartphone or tablet) needs to be
connected to the same router/access point as the wibutler pro. After having started the
app, search for the wibutler pro and select it. The wibutler pro can be identified by its
LAN MAC address that is located on the bottom of the device.
For initial registration enter the user name „admin“ and the individual master key as
passwort. The master key is also located on the bottom of the device.
After registration you need to create a user account that will be used for successional
logins. The
„admin“ account will then be deactivated by the system automatically. If a
user login is not possible (e.g. forgotten password), the admin mode can be activated
by pressing the service button on the back of the wibutler pro. You can now log in as
„admin“ using the master key. This feature enables a system access via admin pass-
word. The user decides when the admin login should be active. Due to safety reasons,
activation is linked to the service button. An online activation is not possible. This ma-
kes sure that no unauthorised person can access the system, as long as the user keeps
the login data for the admin account safe.
Note:
The admin mode will automatically be deactivated after 12 hours.