www.ies-synergy.com
User Manual
DUM3017446-EN
4
1. Safety notes
Notice
Read these instructions carefully, and look at the equipment to become familiar with the device before trying
to install, operate, or maintain it. The following special messages may appear throughout this documentation
or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies
a procedure.
The addition of this symbol to a Danger hazard statements indicates that an electrical hazard
exists, wich result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personnal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
I
DANGER
DANGER
indicates an imminently hazardous situation which, if not avoided,
will result
in death or seri-
ous injury.
I
WARNING
WARNING
indicates a potentially hazardous situation which, if not avoided,
can result
in death or seri-
ous injury.
I
CAUTION
CAUTION
indicates a potentially hazardous situation which, if not avoided,
can result
in minor or mod-
erate injury.
NOTICE
NOTICE
is used to address practices not related to physical injury.
Please note
IES Synergy declines all responsibility for improper use of this equipment.
Technical documentation is an integral part of a product. Until it is disposed of, always keep the technical docu-
mentation close to the unit at hand, as it contains important information. Provide technical documentation to
the person concerned if you sell, assign or lend the product.
