4
OPERATING INSTRUCTIONS
Balancer
9
The arrows on the housing (
②
) show the
direction of rotation to increase or reduce
the load-bearing capacity.
4.4.1
Increasing the Load-bearing
Capacity
Turn the rotary knob (
③
)
to the left (anti-
clockwise) to increase the load-bearing
capacity.
4.4.2
Reducing the Load-bearing
Capacity
Turn the rotary knob (
③
)
to the right
(clockwise) to reduce the load-bearing
capacity.
4.4.3
Setting the Rope Length
If you want to set a rope length of less
than 1.6 m, proceed as follows:
1.
Loosen the screws on the rope clamp
(
⑤
) until you can move it.
2.
Position the rope clamp (
⑤
)
at the
desired position.
3.
Tighten up the screws.
