4
OPERATING INSTRUCTIONS
Balancer
8
4.2.2
Installing the Balancer in a
Movable Position
Note!
We recommend installing the
balancer in a movable position
to ensure that the rope is not
subjected to friction.
Use the supplied snap hook (
B
) to fasten
the balancer and secure it with the retain-
ing rope (
C
) on the bracket, which you
should attach separately if possible.
Make sure that adequate lengths of the
retaining rope (
C
) are routed above one
another and that the clamp (
D
) blocks
both sections of the ropes that are on top
of one another.
4.3
Suspending a Load
Danger!
When suspending a load, hold
the rope tight, e.g. on the rope
clamp (
⑤
); otherwise, it could
fly back and cause injuries.
Use suitable, safe fastenings to suspend
the multifunction plug including the cable.
Note!
If you choose to install the
balancer in a fixed position,
you can use the supplied
securing components like the
rope, clamp and ring, for
example, to suspend the mul-
tifunction plug.
4.4
Setting the Balancer
Caution!
Make sure that the rope is not
pulled out completely. There
should be at least 5 cm left.
If necessary, move the rope
clamp (
⑤
) and lock it to limit
the lift upwards.
Estimate the weight of the multifunction
plug including the cable. You can find
details of the weight of the multifunction
plug in the combined plug and socket
operating instructions.
Set the necessary load-bearing capacity on
the rotary knob (
③
). The setting range
for the load-bearing capacity is between 2
and 3 kg.