IEP 30917, Руководство по эксплуатации

Страница: 7 / 12

4 OPERATING INSTRUCTIONS Balancer
7
4 Installation
Danger!
Mount the balancer such that
it does not endanger anybody.
4.1 Unpacking the Balancer
Remove the packaging material.
A
Balancer
B
Retaining rope
C
Ring
D
Clamp
E
Snap hook
Operating Instructions
Check that the contents of the package
are complete and inspect for possible
damage. If any components are missing or
are
damaged, contact our customer service
immediately (see also Chapter
1.2 C
USTOMER
S
ERVICE
).
4.2 Installing the Balancer
You can install the balancer on the wall or
on the ceiling by attaching it to a suitable
bracket. The bracket must be attached
securely to the ceiling of the hall and have
adequate load-bearing capacity.
Note!
Install the balancer such that
the rope can be moved freely.
Choose an installation height at which the
central part of the rope is loaded and
where you can easily reach the balancer
when the rope is retracted.
4.2.1 Installing the Balancer in a
Fixed Position
Screw the balancer in a fixed horizontal or
vertical position in at least two fastening
holes (
①
).
Use M8 nuts and bolts with a locking
device to prevent loosening (e.g. self-
locking hexagon nuts as per EN
10511/DIN 985).