IEI Technology WAFER-PV-D5252 Скачать руководство пользователя

Страница: 115 / 142

WAFER-PV-D5252/D4252/N4552 SBC

Page 102

NOTE:

Use the following commands to check if the partitions were created

successfully.

Step 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build-up Recovery Partition.

B.2.3 Install Operating System, Drivers and Applications

Install the operating system onto the unlabelled partition. The partition labeled as

"Recovery" is for use by the system recovery tool and should not be used for installing the

operating system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Содержание WAFER-PV-D5252















































































































































Результаты поиска

Содержание WAFER-PV-D5252

Отзывы:

Похожие инструкции для WAFER-PV-D5252

Бренды по названию

Популярные бренды

IEI Technology WAFER-PV-D5252, Руководство пользователя

Результаты поиска

Содержание WAFER-PV-D5252

Отзывы:

Похожие инструкции для WAFER-PV-D5252

Бренды по названию

Популярные бренды