IEI Technology WAFER-LX Series Скачать руководство пользователя страница 90

Страница: 90 / 198

Page 90

IEI® Technology, Corp

WAFER-LX

5.1 Introduction

A licensed copy of Phoenix Award BIOS is preprogrammed into the ROM BIOS. The BIOS

setup program allows users to modify the basic system configuration. This chapter

describes how to access the BIOS setup program and the configuration options that may

be changed.

5.1.1 Starting Setup

The Phoenix Award BIOS is activated when the computer is turned on. The setup program

can be activated in one of two ways.

1. Press

the

ELETE

key as soon as the system is turned on or

2. Press

the

ELETE

key when the “

Press Del to enter SETUP

” message

appears on the screen.

If the message disappears, restart the computer and try again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press

NTER

to select, use the

AGE

and

AGE

OWN

keys to change entries, press

for help and press

to quit. Navigation

keys are shown below.

Key

Function

Up arrow

Move to the item above

Down arrow

Move to the item below

Left arrow

Move to the item on the left hand side

Right arrow

Move to the item on the right hand side

+/Page up

Increase the numeric value or make changes

-/Page down

Decrease the numeric value or make changes

Esc

Main Menu – Quit and do not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu --

Exit current page and return to Main Menu

General help, only for Status Page Setup Menu and Option

Page Setup Menu

F2 Item

help

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 90 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: