IEI Technology WAFER-KBN-1 Скачать руководство пользователя страница 114

Страница: 114 / 138

WAFER-KBN-i1 3.5" SBC

Page 100

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Graphics

LAN

Audio

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD that came with the system into a CD drive connected to the

system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears.

Step 3:

Click WAFER-KBN-i1.

Step 4:

The list of drivers appears.

Содержание WAFER-KBN-1











































































































































Результаты поиска

Содержание WAFER-KBN-1

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology WAFER-KBN-1, Руководство пользователя

Результаты поиска

Содержание WAFER-KBN-1

Отзывы:

Бренды по названию

Популярные бренды