IEI Technology WAFER-945GSELVDS2-N270-R10 Скачать руководство пользователя страница 91

Страница: 91 / 140

WAFER-945GSELVDS2

Page 79

CD/DVD

The CD/DVD option specifies that an IDE CD-ROM

drive is attached to the specified IDE channel. The

BIOS does not attempt to search for other types of

IDE disk drives on the specified channel.

ARMD

This option specifies an ATAPI Removable Media

Device. These include, but are not limited to:

ZIP

LS-120

LBA/Large Mode [Auto]

Use the

LBA/Large Mode

option to disable or enable BIOS to auto detects LBA (Logical

Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the

maximum drive capacity is 137 GB.

Disabled

BIOS is prevented from using the LBA mode control on

the specified channel.

Auto D

EFAULT

BIOS auto detects the LBA mode control on the specified

channel.

Block (Multi Sector Transfer) [Auto]

Use the

Block (Multi Sector Transfer)

to disable or enable BIOS to auto detect if the

device supports multi-sector transfers.

Disabled

BIOS is prevented from using Multi-Sector Transfer on the

specified channel. The data to and from the device occurs

one sector at a time.

Auto D

EFAULT

BIOS auto detects Multi-Sector Transfer support on the

drive on the specified channel. If supported the data

transfer to and from the device occurs multiple sectors at

a time.

Содержание WAFER-945GSELVDS2-N270-R10













































































































































Результаты поиска

Содержание WAFER-945GSELVDS2-N270-R10

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology WAFER-945GSELVDS2-N270-R10, Руководство пользователя

Результаты поиска

Содержание WAFER-945GSELVDS2-N270-R10

Отзывы:

Бренды по названию

Популярные бренды