IEI Technology TANK -870-Q170 S eries, Руководство пользователя, Страница: 58 / 143

TANK -870-Q170 E mbedded S ys tem
Page 45
3.7 P owering On/Off the S ys tem
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.

Power on the system: press the power button for 3 seconds

Power off the system: press the power button for 6 seconds
Figure 3-27: Power Button
3.8 P ower
There are two power connectors on the rear panel. Power 1 connector is a 3-pin terminal
block that supports ACC On signal. Power 2 connector is a DIN connector that can directly
connect to a power adapter. The supported power input voltages are:

Power 1 (terminal block) : 9 V~ 36 V

Power 2 (DC jack) : 9 V ~ 36 V