IEI Technology TANK -870-Q170 S eries, Руководство пользователя, Страница: 45 / 143

TANK -870-Q170 E mbedded S ys tem
Page 32
S tep 2:
Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom surface or the left side panel ( Figure 3-6 ).
Left Side Panel
Figure 3-6: Mounting Bracket Retention Screws
S tep 3: Secure the brackets to the system by inserting two retention screws into each
bracket ( Figure 3-6 ).
S tep 4:
Drill holes in the intended installation surface.
S tep 5:
Align the mounting holes in the sides of the mounting brackets with the predrilled
holes in the mounting surface.
S tep 6: Insert four retention screws, two in each bracket, to secure the system to the
wall.
3.5 E xternal P eripheral Interface C onnectors
The TANK-870-Q170 Series has the following connectors. Detailed descriptions of the
connectors can be found in the subsections below.

ACC mode switch

AT/ATX power mode switch

Audio

DIO

Ethernet