IEI Technology TANK -870-Q170 S eries, Руководство пользователя, Страница: 41 / 143

TANK -870-Q170 E mbedded S ys tem
Page 28
3.1 Ins tallation P recautions
During installation, be aware of the precautions below:

Read the user manual
: The user manual provides a complete description of
the TANK-870-Q170 Series, installation instructions and configuration
options.

DANGER! Disconnect Power
: Power to the TANK-870-Q170 Series must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the TANK-870-Q170 Series is opened while the power cord is
still connected to an electrical outlet.

Qualified Personnel
: The TANK-870-Q170 Series must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.

Air Circulation
: Make sure there is sufficient air circulation when installing the
TANK-870-Q170 Series. The TANK-870-Q170 Series’s cooling vents must not
be obstructed by any objects. Blocking the vents can cause overheating of the
TANK-870-Q170 Series. Leave at least 5 cm of clearance around the
TANK-870-Q170 Series to prevent overheating.

Grounding : The TANK-870-Q170 Series should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the TANK-870-Q170 Series.
3.2 Hard Dis k Drive (HDD) Ins tallation
To install the hard drive, please follow the steps below:
S tep 1:
Loosen the two thumbscrews on the front panel, slide the cover outward, and
then lift the cover up gently ( Figure 3-1 ).