IEI Technology TANK-860-HM86 Series, Руководство пользователя

Страница: 44 / 134

TANK-860-HM86 Em b e d d e d S ys te m
P a g e 32
3.1 In s ta lla tio n P re c a u tio n s
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the TANK-860-HM86 Series, installation instructions and configuration
options.

DANGER! Disconnect Power : Power to the TANK-860-HM86 Series must
be disconnected during the installation process, or before any attempt is
made to access the rear panel. Electric shock and personal injury might occur
if the rear panel of the TANK-860-HM86 Series is opened while the power
cord is still connected to an electrical outlet.

Qualified Personnel : The TANK-860-HM86 Series must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.

Air Circulation : Make sure there is sufficient air circulation when installing the
TANK-860-HM86 Series. The TANK-860-HM86 Series’s cooling vents must
not be obstructed by any objects. Blocking the vents can cause overheating of
the TANK-860-HM86 Series. Leave at least 5 cm of clearance around the
TANK-860-HM86 Series to prevent overheating.

Grounding : The TANK-860-HM86 Series should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the TANK-860-HM86 Series.
3.2 CFa s t In s ta lla tio n
To install the CFast card, please follow the steps below:
S te p 1:
Locate the CFast socket, and then loosen the thumbscrew ( Figure 3-1 ).