manualshive.com logo in svg

IEI Technology SBOX-100-QM87i, Руководство пользователя, Страница: 15 / 115

Поделиться
Скачать
IEI Technology SBOX-100-QM87i Скачать руководство пользователя страница 15

 

 

SBOX-100-QM87i Fanless Marine Computer 

Page 3

  Supports multiple display interfaces, including one HDMI connector, one 

DVI-D connector and one VGA connector 

  Two USB 3.0 ports and two USB 2.0 ports 

  Four RS-232/422/485 and one RS-232 DB-9 serial ports 

  Three audio jacks: line-out, line-in and mic-in 

  RoHS compliant design 

1.3 Front Panel 

The front panel of the SBOX-100-QM87i provides access to the following external I/O 

connectors and LED indicators:   

  4 x RS-232/422/485 serial port 

  1 x Power LED indicator (on: green; off: amber) 

  1 x HDD/CFast card LED indicator (active: blinking in red) 

  1 x IPMI LED indicator (enabled: blue; disabled: off) 

  2 x Knockout hole for SMA antenna connector 

 

Figure 1-2: Front Panel 

 

 NOTE: 

The default settings for COM2

–

COM5 are set to RS-485. To configure 

the COM port mode, please change the BIOS options in Advanced 

 

F81866 Super IO Configuration 

 Serial Port Configuration (refer to 

Section 4.3.10.1

). 

Содержание SBOX-100-QM87i




















































































































Отзывы:

Нет отзывов