IEI Technology SBOX-100-QM87i Скачать руководство пользователя страница 100

Страница: 100 / 115

SBOX-100-QM87i Fanless Marine Computer

Page 88

FCC WARNING

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:



This device may not cause harmful interference, and



This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Содержание SBOX-100-QM87i




















































































































Результаты поиска

Содержание SBOX-100-QM87i

Отзывы:

IEI Technology SBOX-100-QM87i, Руководство пользователя, Страница: 100 / 115

Результаты поиска

Содержание SBOX-100-QM87i

Отзывы: