IEI Technology PUZZLE-A001, Руководство пользователя

Страница: 30 / 90

PUZZLE-A001
Page 20
Step 5:
Align the expansion card to the PCIe slot. Press gently, but firmly, to seat the
expansion card correctly in the slot. Install the bracket screw(s) to secure the
card to the expansion slot module.
Figure 3-9: PCIe Expansion Card Installation
Step 6: Place the expansion slot module back to the original position by hooking the
slotted hole into the positioning stud in the chassis ( Figure 3-10 A ). Push the
connector of the expansion slot module into the edge connector to install it.
During installation, ensure that
1. the connector on the slot module is properly aligned and connected to the
edge connector;
2. the two studs on the side is going through the two holes in the chassis;
3. the slot module tab is going under the chassis tab.