IEI Technology PPC-F D-ULT5 Series Скачать руководство пользователя страница 93

Страница: 93 / 129

PPC-FxxD-ULT5

Page 79

4.7 Save & Exit

Use the

Save & Exit

menu (

BIOS Menu 28

) to load default BIOS values, optimal failsafe

values and to save configuration changes.

Main

Advanced

Chipset

Security

Boot

Save & Exit

Save Changes and Reset
Discard Changes and Reset

Restore Defaults
Save as User Defaults
Restore User Defaults

Reset the system after
saving the changes.
---------------------



: Select Screen

↑

↓

: Select Item

Enter

Select

General Help

Previous Values

Optimized

Defaults
F4

Save

ESC

Exit

BIOS Menu 28: Save & Exit



Save Changes and Reset

Use the

Save Changes and Reset

option to save the changes made to the BIOS options

and to exit the BIOS configuration setup program.



Discard Changes and Reset

Use the

Discard Changes and Reset

option to exit the system without saving the

changes made to the BIOS configuration setup program.



Restore Defaults

Use the

Restore Defaults

option to load the optimal default values for each of the

parameters on the Setup menus.

F3 key can be used for this operation.



Save as User Defaults

Use the

Save as User Defaults

option to save the changes done so far as user defaults.



Restore User Defaults

Use the

Restore User Defaults

option to restore the user defaults to all the setup options.

Содержание PPC-F D-ULT5 Series


































































































































Результаты поиска

Содержание PPC-F D-ULT5 Series

Отзывы:

IEI Technology PPC-F D-ULT5 Series, Руководство пользователя, Страница: 93 / 129

Результаты поиска

Содержание PPC-F D-ULT5 Series

Отзывы: