IEI Technology PPC-F D-ULT5 Series Скачать руководство пользователя страница 43

Страница: 43 / 129

PPC-FxxD-ULT5

Page 29

3.8 Mounting the System

The following sections describe the mounting methods supported by the PPC-FxxD-ULT5.

3.8.1 Arm Mounting

The PPC-FxxD-ULT5 is VESA (Video Electronics Standards Association) compliant and

can be mounted on an arm with a 75 mm or 100 mm interface pad. To mount the

PPC-FxxD-ULT5 on an arm, please follow the steps below.

Step 1:

The arm is a separately purchased item. Please correctly mount the arm onto

the surface it uses as a base. To do this, refer to the installation documentation

that came with the mounting arm.

NOTE:

When purchasing the arm please ensure that it is VESA compliant and

that the arm has a 75 mm / 100 mm interface pad. If the mounting arm

is not VESA compliant it cannot be used to support the

PPC-FxxD-ULT5.

Step 2:

Once the mounting arm has been firmly attached to its surface, lift the

PPC-FxxD-ULT5 onto the interface pad of the mounting arm.

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

PPC-FxxD-ULT5. The PPC-FxxD-ULT5 arm mount retention screw holes are

shown in

Figure 3-18

Содержание PPC-F D-ULT5 Series


































































































































Результаты поиска

Содержание PPC-F D-ULT5 Series

Отзывы:

IEI Technology PPC-F D-ULT5 Series, Руководство пользователя, Страница: 43 / 129

Результаты поиска

Содержание PPC-F D-ULT5 Series

Отзывы: