IEI Technology PPC-F D-ULT5 Series Скачать руководство пользователя страница 114

Страница: 114 / 129

PPC-FxxD-ULT5

Page 100

WARNING:

The precautions outlined in this chapter should be strictly followed.

Failure to follow these precautions may result in permanent damage to

the PPC-FxxD-ULT5.

B.1 Safety Precautions

Please follow the safety precautions outlined in the sections that follow:

B.1.1 General Safety Precautions

Please ensure the following safety precautions are adhered to at all times.



Follow the electrostatic precautions

outlined below whenever the device is

opened.



Make sure the power is turned off and the power cord is disconnected

whenever the PPC-FxxD-ULT5 is being installed, moved or modified.



To prevent the risk of electric shock, make sure power cord is

unplugged from wall socket.

To fully disengage the power to the unit,

please disconnect the power cord from the power outlet. Refer servicing to

qualified service personnel. The power outlet shall be readily available and

accessible.



Do not apply voltage levels that exceed the specified voltage range

Doing so may cause fire and/or an electrical shock. Use a power cord that

matches the voltage of the power outlet, which has been approved and

complies with the safety standard of your particular country.



Electric shocks can occur

if the PPC-FxxD-ULT5 chassis is opened when it

is running. To avoid risk of electric shock, this device must only be connected

to a supply mains with protective earth.



Do not drop or insert any objects

into the ventilation openings of the

PPC-FxxD-ULT5.

Содержание PPC-F D-ULT5 Series


































































































































Результаты поиска

Содержание PPC-F D-ULT5 Series

Отзывы:

IEI Technology PPC-F D-ULT5 Series, Руководство пользователя, Страница: 114 / 129

Результаты поиска

Содержание PPC-F D-ULT5 Series

Отзывы: