IEI Technology PPC-F C-Q370 Series, Руководство пользователя, Страница: 94 / 146

PPC-FxxC-Q370
Page 76

Detect Non-Compliance Device [Disabled]
Use the Detect Non-Compliance Device option to detect non-compliance PCIe device in
PEG.

Disabled D
EFAULT
Do not detect non-compliance PCIe device in PEG

Enabled
Detect non-compliance PCIe device in PEG
4.4.2 PCH-IO Configuration
Use the PCH-IO Configuration menu ( BIOS Menu 24 ) to configure the PCH parameters.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
PCH-IO Configuration
Auto Power Button Status [Disable (ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> SATA And RST Configuration
> HD Audio Configuration
Power Saving Function(ERP) [Disabled]
USB Power SW1 [+5V DUAL]
USB Power SW2 [+5V DUAL]
Select AC power state
when power is re-applied
after a power failure.
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 24: PCH-IO Configuration

Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system.

Power Off
The system remains turned off

Power On
The system turns on

Last State D
EFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.