IEI Technology PPC-37 A-N26 Series Скачать руководство пользователя страница 198

Страница: 198 / 200

PPC-37xxA-N26 Panel PC

Page 182

E.1 Hazardous Material Disclosure Table for IPB Products
Certified as RoHS Compliant Under 2002/95/EC Without Mercury

The details provided in this appendix are to ensure that the product is compliant with the

Peoples Republic of China (China) RoHS standards. The table below acknowledges the

presences of small quantities of certain materials in the product, and is applicable to China

RoHS only.

A label will be placed on each product to indicate the estimated “Environmentally Friendly

Use Period” (EFUP). This is an estimate of the number of years that these substances

would “not leak out or undergo abrupt change.” This product may contain replaceable

sub-assemblies/components which have a shorter EFUP such as batteries and lamps.

These components will be separately marked.

Please refer to the table on the next page.

Содержание PPC-37 A-N26 Series









































































































































































































Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы:

IEI Technology PPC-37 A-N26 Series, Руководство пользователя, Страница: 198 / 200

Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы: