IEI Technology PPC-37 A-N26 Series Скачать руководство пользователя страница 192

Страница: 192 / 200

PPC-37xxA-N26 Panel PC

Page 176

Outside the European Union - If you wish to dispose of used electrical and

electronic products outside the European Union, please contact your local

authority so as to comply with the correct disposal method.

Within the European Union:

EU-wide legislation, as implemented in each Member State, requires that

waste electrical and electronic products carrying the mark (left) must be

disposed of separately from normal household waste. This includes

monitors and electrical accessories, such as signal cables or power cords.

When you need to dispose of your display products, please follow the

guidance of your local authority, or ask the shop where you purchased the product. The

mark on electrical and electronic products only applies to the current European Union

Member States.

Please follow the national guidelines for electrical and electronic product disposal.

C.2 Maintenance and Cleaning Precautions

When maintaining or cleaning the EP series, please follow the guidelines below.

C.2.1 Maintenance and Cleaning

Prior to cleaning any part or component of the EP series, please read the details below.

Except for the LCD panel, never spray or squirt liquids directly onto any other

components. To clean the LCD panel, gently wipe it with a piece of soft dry

cloth or a slightly moistened cloth.

The interior of the EP series does not require cleaning. Keep fluids away from

the EP series interior.

Be cautious of all small removable components when vacuuming the EP

series.

Turn the EP series off before cleaning the EP series.

Never drop any objects or liquids through the openings of the EP series.

Be cautious of any possible allergic reactions to solvents or chemicals used

when cleaning the EP series.

Avoid eating, drinking and smoking within vicinity of the EP series.

Содержание PPC-37 A-N26 Series









































































































































































































Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы:

IEI Technology PPC-37 A-N26 Series, Руководство пользователя, Страница: 192 / 200

Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы: