IEI Technology PPC-37 A-N26 Series Скачать руководство пользователя страница 165

Страница: 165 / 200

PPC-37xxA-N26 Panel PC

Page 149

Step 12:

The recovery tool main menu window is shown as below. Press any key to

reboot the system.

Figure B-21: Press Any Key to Continue

B.3 Auto Recovery Setup Procedure

The auto recovery function allows a system to automatically restore from the factory

default image after encountering a Blue Screen of Death (BSoD) or a hang for around 10

minutes. To use the auto recovery function, follow the steps described in the following

sections.

CAUTION:

The setup procedure may include a step to create a factory default

image. It is suggested to configure the system to a factory default

environment before the configuration, including driver and application

installations.

Step 1:

Follow the steps described in

Section B.2.1 ~ Section B.2.3

to setup BIOS,

create partitions and install operating system.

Step 2:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Содержание PPC-37 A-N26 Series









































































































































































































Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы:

IEI Technology PPC-37 A-N26 Series, Руководство пользователя, Страница: 165 / 200

Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы: