IEI Technology PPC-37 A-N26 Series Скачать руководство пользователя страница 160

Страница: 160 / 200

PPC-37xxA-N26 Panel PC

Page 144

B.2.5 Create Factory Default Image

NOTE:

Before creating the factory default image, please configure the system

to a factory default environment, including driver and application

installations.

To create a factory default image, please follow the steps below.

Step 1:

Turn on the system. When the following screen displays (

Figure B-10

), press

the <

> key to access the recovery tool. The message will display for 10

seconds, please press F3 before the system boots into the operating system.

Figure B-10: Press F3 to Boot into Recovery Mode

Step 2:

The recovery tool menu appears. Type <

> and press <

Enter

>. (

Figure B-11

)

Figure B-11: Recovery Tool Menu

Step 3:

The About Symantec Ghost window appears. Click

button to continue.

Содержание PPC-37 A-N26 Series









































































































































































































Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы:

IEI Technology PPC-37 A-N26 Series, Руководство пользователя, Страница: 160 / 200

Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы: