IEI Technology POS-6614 Скачать руководство пользователя страница 125

Страница: 125 / 236

POS-6614 Motherboard

Hard Disk Write Protect [Disabled]

Use the

Hard Disk Write Protect

BIOS option to protect the hard disks from being

overwritten. This menu item is only effective if the device is accessed through the BIOS.

Disabled D

EFAULT

Allows hard disks to be overwritten

Enabled

Prevents hard disks from being overwritten

IDE Detect Time Out (Sec) [35]

Use the

IDE Detect Time Out (Sec)

BIOS to specify the maximum time (in seconds) the

AMI BIOS can search for IDE devices. This allows fine-tuning of the settings to allow for

faster boot times. The following configuration options are available.

0 seconds

5 seconds (Default)

10 seconds

15 seconds

20 seconds

25 seconds

30 seconds

35 seconds

The best setting to use if the onboard IDE controllers are set to a specific IDE disk drive in

the AMIBIOS is “0 seconds” and a large majority of ultra ATA hard disk drives can be

detected well within “5 seconds”.

ATA (PI) 80Pin Cable Detection [Host & Device]

Use the

ATA (PI) 80Pin Cable Detection

option to enable the system to detect the

correct cable. When an Ultra ATA/66, an Ultra ATA/100 or an Ultra ATA/133 IDE hard disk

drive is used, an 80-conductor ATA cable must be used. The 80-conductor ATA cable is

plug compatible with the standard 40-conductor ATA cable. The system must detect the

presence of correct cable so that the AMIBIOS can instruct the drive to run at the correct

speed for the cable type detected.

Page 125

Содержание POS-6614













































































































































































































































Результаты поиска

Содержание POS-6614

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology POS-6614, Руководство пользователя

Результаты поиска

Содержание POS-6614

Отзывы:

Бренды по названию

Популярные бренды