IEI Technology PCISA-6612, Руководство пользователя

Страница: 86 / 220

Page 86
IEI® Technology, Corp .
PCISA -6612 CPU Card
If the PCISA-6612 fails to boot due to improper BIOS settings, use this connector to clear
the CMOS data and reset the system BIOS information. To do this, use the jumper cap to
close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
Clear CMOS DESCRIPTION
Short 1 - 2
(Default)
Keep CMOS Setup
Short 2 - 3 Clear CMOS Setup
Table 4-2: Clear CMOS Jumper Settings
4.5.2 LVDS Voltage Selection
WARNING
Permanent damage to the screen and PCISA-6612 may occur
if the wrong voltage is selected with this jumper. Refer to the
user guide that cam with the monitor to select the correct
voltage.