IEI Technology PCIE-9450 Скачать руководство пользователя страница 135

Страница: 135 / 232

PCIE-9450 PICMG 1.3 CPU Card

Page 115

Allocate IRQ to PCI VGA [Yes]

Use the Allocate IRQ to PCI VGA option to restrict the system from giving the VGA

adapter card an interrupt address.

Yes D

EFAULT

Assigns an IRQ to a PCI VGA card if card requests IRQ

Does not assign IRQ to a PCI VGA card even if the card

requests an IRQ

Palette Snooping [Disabled]

Use the

Palette Snooping

option to enable or disable the palette snooping function.

Disabled D

EFAULT

Unless the VGA card manufacturer requires palette

snooping to be enabled, this option should be disabled.

Enabled

PCI devices are informed that an ISA based Graphics

device is installed in the system so the ISA based

Graphics card functions correctly. This does not

necessarily indicate a physical ISA adapter card. The

graphics chipset can be mounted on a PCI card. Always

check with the adapter card manual first, before

modifying the default settings in the BIOS.

PCI IDE BusMaster [Disabled]

Use the

PCI IDE BusMaster

BIOS option to enable or prevent PCI IDE busmastering.

Disabled D

EFAULT

Busmastering is prevented

Enabled

IDE controller on the PCI local bus has mastering

capabilities

Содержание PCIE-9450









































































































































































































































Результаты поиска

Содержание PCIE-9450

Отзывы:

IEI Technology PCIE-9450, Руководство пользователя, Страница: 135 / 232

Результаты поиска

Содержание PCIE-9450

Отзывы: