IEI Technology PCIE-9450 Скачать руководство пользователя страница 130

Страница: 130 / 232

PCIE-9450 PICMG 1.3 CPU Card

Page 110

8 USB Ports

EFAULT

Eight USB ports are enabled

USB 2.0 Controller [Enabled]

Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller

Disabled

USB 2.0 controller disabled

Enabled D

EFAULT

USB 2.0 controller enabled

Legacy USB Support [Enabled]

Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

USB2.0 Controller Mode [HiSpeed]

The

USB 2.0 Controller Mode

BIOS option sets the speed of the USB 2.0 controller.

FullSpeed

The controller is capable of operating at full speed

(12Mbits/second)

HiSpeed D

EFAULT

The controller is capable of operating at high speed

(480Mbits/second)

Содержание PCIE-9450









































































































































































































































Результаты поиска

Содержание PCIE-9450

Отзывы:

IEI Technology PCIE-9450, Руководство пользователя, Страница: 130 / 232

Результаты поиска

Содержание PCIE-9450

Отзывы: