IEI Technology Nova-lx Скачать руководство пользователя страница 119

Страница: 119 / 225

NOVA-LX 5.25” Motherboard

Page 99

6.1 Introduction

A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup

program allows users to modify the basic system configuration. This chapter describes

how to access the BIOS setup program and the configuration options that may be

changed.

6.1.1 Starting Setup

The AMI BIOS is activated when the computer is turned on. The setup program can be

activated in one of two ways.

1. Press

the

ELETE

key as soon as the system is turned on or

2. Press

the

ELETE

key when the “

Press Del to enter SETUP

” message

appears on the screen. 0.

If the message disappears before the

ELETE

key is pressed, restart the computer and try

again.

6.1.2 Using Setup

Use the arrow keys to highlight items, press

NTER

to select, use the PageUp and

PageDown keys to change entries, press

for help and press

to quit. Navigation

keys are shown in.

Key

Function

Up arrow

Move to previous item

Down arrow

Move to next item

Left arrow

Move to the item on the left hand side

Right arrow

Move to the item on the right hand side

Esc key

Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu --

Exit current page and return to Main Menu

Page Up key

Increase the numeric value or make changes

Page Dn key

Decrease the numeric value or make changes

Содержание Nova-lx


































































































































































































































Результаты поиска

Содержание Nova-lx

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology Nova-lx, Руководство пользователя

Результаты поиска

Содержание Nova-lx

Отзывы:

Бренды по названию

Популярные бренды