IEI Technology NANO-QM871 Скачать руководство пользователя страница 127

Страница: 127 / 203

NANO-QM871 EPIC SBC

Page 112

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

Graphics

LAN

USB

3.0

Audio

Intel®

AMT

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD that came with the system into a CD drive connected to the

system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Содержание NANO-QM871












































































































































































































Результаты поиска

Содержание NANO-QM871

Отзывы:

IEI Technology NANO-QM871, Руководство пользователя, Страница: 127 / 203

Результаты поиска

Содержание NANO-QM871

Отзывы: