IEI Technology NANO-QM871-i1-i7, Руководство пользователя

Страница: 69 / 159

NANO-QM871-i1 EPIC SBC
Page 56
Figure 4-11: AT/ATX Mode Selection Jumper Location
4.7.2 Clear CMOS
Jumper Label: J_CMOS1
Jumper Type: Push button
Jumper Location: See Figure 4-12
If the NANO-QM871-i1 fails to boot due to improper BIOS settings, the clear CMOS button
clears the CMOS data and resets the system BIOS information. To do this, push the clear
CMOS button for three seconds, then restart the system.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.