IEI Technology NANO-QM770-R10, Руководство пользователя

Страница: 56 / 145

NANO-QM770 EPIC SBC
Page 42
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the NANO-QM770,
NANO-QM770 components and injury to the user.
Before and during the installation please DO the following:

Read the user manual :
o
The user manual provides a complete description of the installation
instructions and configuration options.

Wear an electrostatic discharge cuff (ESD) :
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.

Place on an antistatic pad :
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.

Turn all power off :
o
Make sure the product is disconnected from all power supplies and that
no electricity is being fed into the system.
Before and during the installation of the NANO-QM770 DO NOT:

DO NOT remove any of the stickers on the PCB board. These stickers are
required for warranty validation.

DO NOT use the product before verifying all the cables and power connectors
are properly connected.

DO NOT allow screws to come in contact with the PCB circuit, connector pins,
or its components.