IEI Technology NANO-GM45A2-R10, Руководство пользователя

Страница: 47 / 148

NANO-GM45A2 EPIC SBC
Page 35
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
NANO-GM45A2 may result in permanent damage to the
NANO-GM45A2 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the NANO-GM45A2. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the NANO-GM45A2 or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad : When configuring the NANO-GM45A2, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
NANO-GM45A2.
Only handle the edges of the PCB : When handling the PCB, hold the PCB
by the edges.