IEI Technology NANO-BT Series Скачать руководство пользователя страница 16

Страница: 16 / 145

NANO-BT EPIC SBC

Page 2

1.1 Introduction

Figure 1-1: NANO-BT

The NANO-BT series is an EPIC form factor single bard computer. It has an on-board

22nm Intel® Atom™ or Celeron® processor, and supports one 204-pin 1333/1066 MHz

dual-channel unbuffered DDR3 Low Voltage (DDR3L) SDRAM SO-DIMM with up to

8.0 GB of memory.

The NANO-BT-i1 models feature Intelligent Platform Management Interface (IPMI) that

helps lower the overall costs of server management by enabling users to maximize IT

resource, save time and manage multiple systems. The NANO-BT-i1 supports IPMI 2.0

through the optional iRIS-1010 module.

The NANO-BT includes one VGA port and one HDMI port for dual independent display It

also has an internal 18-bit/24-bit dual-channel LVDS connector supporting up to 1920 x

1200 resolutions. Expansion and I/O include one PCI-104 slot, one PCIe Mini slot, one

USB 3.0 port plus one USB 2.0 on the rear panel, two USB 2.0 by pin header, two SATA

3Gb/s connectors, three RS-232 serial ports, and one PS/2 keyboard/mouse connector.

Содержание NANO-BT Series


















































































































































Результаты поиска

Содержание NANO-BT Series

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology NANO-BT Series, Руководство пользователя

Результаты поиска

Содержание NANO-BT Series

Отзывы:

Бренды по названию

Популярные бренды