IEI Technology NANO-9453 Скачать руководство пользователя страница 96

Страница: 96 / 242

NANO-9453 EPIC Motherboard

Page 78

Keyboard

Mouse

RS-232 serial communications device

5.3 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU,

NANO-9453 and other electronic components attached to the system

may be incurred. Running a CPU without a cooling kit may also result

in injury to the user.

The CPU, CPU cooling kit and DIMM are the most critical components of the NANO-9453.

If one of these component is not installed the NANO-9453 cannot run.

5.3.1 Socket M CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

To install a Socket M CPU onto the NANO-9453, follow the steps below:

Содержание NANO-9453



















































































































































































































































Результаты поиска

Содержание NANO-9453

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology NANO-9453, Руководство пользователя

Результаты поиска

Содержание NANO-9453

Отзывы:

Бренды по названию

Популярные бренды