IEI Technology NANO-9453 Скачать руководство пользователя страница 48

Страница: 48 / 242

NANO-9453 EPIC Motherboard

Page 30

2.8.3.2 Super I/O 16C550 UARTs

The onboard Super I/O has two integrated 16C550 UARTs that can support the following:

Two standard serial ports (COM1 and COM2)

IrDa 1.0 and ASKIR protocols

Another two chipsets connected to the LPC bus provided connectivity to another two serial

port connectors (COM3 and COM4).

2.8.3.3 Super I/O Enhanced Hardware Monitor

The Super I/O Enhanced Hardware Monitor monitors three thermal inputs, VBAT

internally, and eight voltage monitor inputs. These hardware parameters are reported in

the BIOS and can be read from the BIOS Hardware Health Configuration menu.

2.8.3.4 Super I/O Fan Speed Controller

The Super I/O fan speed controller enables the system to monitor the speed of the fan.

One of the pins on the fan connector is reserved for fan speed detection and interfaced to

the fan speed controller on the Super I/O. The fan speed is then reported in the BIOS.

2.8.3.5 Super I/O Parallel Port

The Super I/O parallel port (LPT) supports standard mode, enhanced mode and

high-speed mode parallel port devices. The LPT is compliant with the following LPT

modes.

Standard mode

Bi-directional SPP compliant

Enhanced mode

EPP v1.7 compliant

EPP v1.9 compliant

High-speed mode

ECP, IEEE 1284 compliant

Содержание NANO-9453



















































































































































































































































Результаты поиска

Содержание NANO-9453

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology NANO-9453, Руководство пользователя

Результаты поиска

Содержание NANO-9453

Отзывы:

Бренды по названию

Популярные бренды