IEI Technology NANO-6613 Скачать руководство пользователя страница 83

Страница: 83 / 174

-83

NANO-6613 Motherboard

F2 /F3 key

Change color from total 16 colors. F2 to select color

forward.

F10 key

Save all the CMOS changes, only for Main Menu

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When

is pressed a small help window describing the appropriate keys to use and the

possible selections for the highlighted item appears. To exit the Help Window press

the

key again.

5.1.4 Unable to Reboot after Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS

defaults. Use the jumper described in Chapter

Chapter 3

Section 3.4.1

5.1.5 BIOS Menu Bar

The

menu bar

on top of the BIOS screen has the following main items:

Main

Changes the basic system configuration.

Advanced

Changes the advanced system settings.

PCIPnP

Changes the advanced PCI/PnP Settings

Chipset

Changes the chipset settings.

Boot

Changes the system boot configuration.

Security

Sets User and Supervisor Passwords.

Exit

Selects exit options and loads default settings

The following sections completely describe the configuration options found in the menu

items at the top of the BIOS screen and listed above.

5.2 Main

When the

BIOS Setup

program is entered, the

Main

menu (

BIOS Menu 1

) appears. The

Main

menu gives an overview of the basic system information.

Содержание NANO-6613















































































































































































Результаты поиска

Содержание NANO-6613

Отзывы:

IEI Technology NANO-6613, Руководство пользователя, Страница: 83 / 174

Результаты поиска

Содержание NANO-6613

Отзывы: