IEI Technology NANO-6613 Скачать руководство пользователя страница 120

Страница: 120 / 174

-12

120

IEI

Technology, Corp

AddOn ROM Display Mode [Force BIOS]

The

AddOn ROM Display Mode

option allows add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

(Default)

Allows the computer system to force a third party

BIOS to display during system boot.

Keep Current

Allows the computer system to display the

information during system boot.

Bootup Num-Lock [On]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified

during boot up.

Off

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

(Default) Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

PS/2 Mouse Support [Auto]

The

PS/2 Mouse Support

BIOS option allows the PS/2 mouse support to be adjusted.

Disabled

Disables PS/2 mouse support and prevents the PS/2

mouse port from using system resources.

Enabled

Allows the system to use a PS/2 mouse.

Содержание NANO-6613















































































































































































Результаты поиска

Содержание NANO-6613

Отзывы:

IEI Technology NANO-6613, Руководство пользователя, Страница: 120 / 174

Результаты поиска

Содержание NANO-6613

Отзывы: