IEI Technology NANO-4386A2 Скачать руководство пользователя страница 164

Страница: 164 / 212

NANO-4386A2 Motherboard

Page 146

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset driver

VGA driver

LAN driver

USB 2.0 driver

Audio driver

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the NANO-4386A2 are on the CD that came with the system. To install

the drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the system does not initiate the "autorun" program when the CD is

inserted, click the

Start

button, select

Run

, then type

X:\autorun.exe

(where

X:\

is the system CD drive) to access the IEI Driver CD main

menu.

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 164 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: