IEI Technology KINO-LX Скачать руководство пользователя страница 16

Страница: 16 / 197

Page 16

IEI® Technology, Corp

KINO-LX Motherboard

1.1 KINO-LX Motherboard Overview

The mini-ITX form factor KINO-LX is fully equipped with advanced multi-mode I/Os. The

KINO-LX is designed for system manufacturers, integrators, and VARs that want

performance, reliability, and quality at a reasonable price. The KINO-LX is equipped with

an on-board low-power consumption and high performance AMD™ Geode™ LX 800

processor.

1.1.1 KINO-LX Applications

The KINO-LX is designed for applications in the following areas:

Industrial PC applications

Human Machine Interface (HMI) applications

Marine, GPS and transportation applications

Financial, retail and kiosk applications

1.1.2 KINO-LX Benefits

Some of the KINO-LX benefits include:

Low power, high performance

Multiple storage option integration including

40 Pin IFM or 3.5

”

HDD

34 Pin floppy disk drive (FDD) support

Dual SATA ports with RAID 0 and RAID 1 support

Data security SATA RAID support

1.1.3 KINO-LX Features

Some of the KINO-LX features are listed below:

Complies with mini-ITX form factor

Complies with RoHS

Embedded AMD

Geode™ LX 800 CPU

Supports a maximum front side bus (FSB) speed up to 500MHz

DDR 333MHz up to 1GB

Complete I/O support with IDE, Dual LAN, 4 x USB2.0 and 6 x COM ports

Содержание KINO-LX






































































































































































































Результаты поиска

Содержание KINO-LX

Отзывы:

IEI Technology KINO-LX, Руководство пользователя, Страница: 16 / 197

Результаты поиска

Содержание KINO-LX

Отзывы: