manualshive.com logo in svg

IEI Technology KINO-CV-KINO-CV-N26001, Руководство пользователя, Страница: 124 / 164

Поделиться
Скачать
IEI Technology KINO-CV-KINO-CV-N26001 Скачать руководство пользователя страница 124

 

 

KINO-CV-D25501/N26001 SBC

Page 110 

 NOTE: 

Use the following commands to check if the partitions were created 

successfully. 

 

Step 6: 

Press any key to exit the recovery tool and automatically reboot the system. 

Please continue to the following procedure: Build the Recovery Partition.

S

te

p

 0

:

 

B.2.3 Install Operating System, Drivers and Applications 

Install the operating system onto the unlabelled partition. The partition labeled "Recovery" 

is for use by the system recovery tool and should not be used for installing the operating 

system or any applications. 

 NOTE: 

The operating system installation program may offer to reformat the 

chosen partition. DO NOT format the partition again. The partition has 

already been formatted and is ready for installing the new operating 

system. 

To install the operating system, insert the operating system installation CD into the optical 

drive. Restart the computer and follow the installation instructions. 

Содержание KINO-CV-KINO-CV-N26001





































































































































































Отзывы:

Нет отзывов