IEI Technology KINO-9652 Скачать руководство пользователя страница 170

Страница: 170 / 269

KINO-9652 Mini-ITX SBC

Page 148

Save Changes and Exit

Use the

Save Changes and Exit

option to save the changes made to the BIOS options

and to exit the BIOS configuration setup program.

Discard Changes and Exit

Use the

Discard Changes and Exit

option to exit the BIOS configuration setup program

without saving the changes made to the system.

Discard Changes

Use the

Discard Changes

option to discard the changes and remain in the BIOS

configuration setup program.

Load Optimal Defaults

Use the

Load Optimal Defaults

option to load the optimal default values for each of the

parameters on the Setup menus.

F9 key can be used for this operation.

Load Failsafe Defaults

Use the

Load Failsafe Defaults

option to load failsafe default values for each of the

parameters on the Setup menus.

F8 key can be used for this operation.

Содержание KINO-9652














































































































































































































































































Результаты поиска

Содержание KINO-9652

Отзывы:

IEI Technology KINO-9652, Руководство пользователя, Страница: 170 / 269

Результаты поиска

Содержание KINO-9652

Отзывы: