IEI Technology KINO-9152G4 Скачать руководство пользователя страница 218

Страница: 218 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 198

G.1 Hazardous Materials Disclosure Table for IPB Products

Certified as RoHS Compliant Under 2002/95/EC Without
Mercury

The details provided in this appendix are to ensure that the product is compliant with the

Peoples Republic of China (China) RoHS standards. The table below acknowledges the

presences of small quantities of certain materials in the product, and is applicable to China

RoHS only.

A label will be placed on each product to indicate the estimated “Environmentally Friendly

Use Period” (EFUP). This is an estimate of the number of years that these substances

would “not leak out or undergo abrupt change.” This product may contain replaceable

sub-assemblies/components which have a shorter EFUP such as batteries and lamps.

These components will be separately marked.

Please refer to the table on the next page.

Содержание KINO-9152G4









































































































































































































































Результаты поиска

Содержание KINO-9152G4

Отзывы:

IEI Technology KINO-9152G4, Руководство пользователя, Страница: 218 / 232

Результаты поиска

Содержание KINO-9152G4

Отзывы: