IEI Technology KINO-780AM2 Скачать руководство пользователя страница 83

Страница: 83 / 131

KINO-780AM2 Motherboard

Page 71

UDMA3

Ultra DMA mode 3 selected with a maximum data transfer

rate of 44 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4 selected with a maximum data transfer

rate of 66.6 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled D

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

5.3.3 Super IO Configuration

Use the

Super IO Configuration

menu (BIOS

6) to set or change the

configurations for the FDD controllers, parallel ports and serial ports.

Содержание KINO-780AM2




































































































































Результаты поиска

Содержание KINO-780AM2

Отзывы:

IEI Technology KINO-780AM2, Руководство пользователя, Страница: 83 / 131

Результаты поиска

Содержание KINO-780AM2

Отзывы: