IEI Technology KINO-690S1 Скачать руководство пользователя страница 33

Страница: 33 / 229

KINO-690S1 Mini-ITX Motherboard

Page 15

Supports a maximum resolution of 2048x1536 @ 32bpp

Game acceleration including support for Microsoft's DirectDraw

The AMD 690G also has the following 3D acceleration features:

Full DirectX 9.0 support

3D Texture support, including projective 3D textures

Anti-aliasing using multi-sampling algorithm with support for 2,4, and 6

samples

New generation rendering engine provides top 3D performance

Support for OpenGL format for Indirect Vertices in Vertex Walker

Motion video acceleration features on the AMD 690G include:

Enhanced MPEG-2 hardware decode acceleration

MPEG-4 decode support

Hardware acceleration for WMV9 playback

Supports top quality DVD and time-shifted SDTV/HDTV television playback

with low CPU usage

2.4.4 Display Support

The AMD 690G supports dual independent displays. The following display interface

connectors are on the KINO-690S1:

TV Out

DVI-D

VGA

2.4.4.1 TV Out

TV Out features include:

Integrated TV encoder from Xilleon products with integrated Avivo™

Supports Macrovision 7.1 copy protection standard (required by DVD players)

Supports the formats of component, composite and S-video outputs

Содержание KINO-690S1






































































































































































































































Результаты поиска

Содержание KINO-690S1

Отзывы:

IEI Technology KINO-690S1, Руководство пользователя, Страница: 33 / 229

Результаты поиска

Содержание KINO-690S1

Отзывы: